Table of Contents
Advertisement
Chapter 5: Commissioning the Autopilot
Adjust the rudder damping
Note: You only need to adjust the rudder damping value if the
autopilot 'hunts' when trying to position the rudder. Increasing the
rudder damping value reduces hunting.
To adjust the rudder damping:
1. Use the AUTO key to page through the Calibration screens until
2. Use the
Save the new settings
When you have adjusted these basic settings in Dealer Calibration:
•
•
you reach the Rudder Damping screen ( rUd dPG ).
L
( NAV ) or
adjust the rudder damping:
•
increase the damping one level at a time until the autopilot
stops hunting, and always use the lowest acceptable value
press and hold STBY for two seconds to store the changes
the screen will then show the STANDBY screen
M
( LIGHTS ) key or course change knob to
45
Hide quick links:
Advertisement
Table of Contents
