Raymarine RayTech RNS 5.0 Getting Started page 8

4
System integration
Raytech RNS V5.0 has been designed to work transparently with Raymarine SeaTalk
data communications package, or any other device that outputs data in National
Marine Electronics Association (NMEA) 0183 format. These protocols allow
information such as heading, wind speed and direction, sea temperature and other
information to be accessed and displayed within RNS. Information generated by RNS
can also be displayed on your boat's standard onboard instruments.
Technical accuracy
The technical information contained within this manual, to the best of our knowledge,
was correct at the time of printing. However, Raymarine cannot accept liability for any
inaccuracies or omissions it may contain.
In addition Raymarine's policy of continuous product improvement may change
specifications without notice. As a result Raymarine cannot accept liability for any
differences between the product and the manual.
Copyright
Under copyright laws use of this manual is intended for the original licensee.
No portion of this manual may be reproduced or transmitted in any form by any means,
electronic or mechanical, including photocopying, recording, or information storage
and retrieval systems, for any purpose other than the licensee's use, without the
express written permission of Raymarine, and provided in the licensing agreement
between you and Raymarine.
RayTech RNS - Getting Started