Raymarine RayTech RNS 5.0 Getting Started page 33

Interfacing RNS
RayTech SeaTalk interface
The RayTech SeaTalk interface converts the SeaTalk data format into RS-232 signals
and vice-versa. When configuring your instrument connections within RNS, the COM
port to which SeaTalk is connected must be set to:
connections are:
RayTech RNS
9 - pin cable
Part No. E86001
Mounting the interface box
To mount your SeaTalk interface box, select a suitable location that is:
• away from direct contact with water.
• clean and grease-free.
• easily accessible for cabling.
• reasonably well protected from physical damage.
RayTech SeaTalk Interface
Part No.E85004
Yellow
Black
Raymarine SeaTalk Interface
Red(v+)
Screen(0v)
Yellow(Data)
Black
Green
D6976_1
29
. The
Cable to
SeaTalk System