Raymarine RayTech RNS 5.0 Getting Started page 36

32
Connecting an hsb
To connect an hsb
1. Place the RayTech CD-ROM into your computer's CD-ROM drive.
2. Plug your hsb
The Add New Hardware wizard is displayed.
3. Follow the on-screen instructions.
4. Click
5. Attach the hsb
PC
6. Attach an hsb
7. Ensure that each end of the hsb
2
PCMCIA PC kit
2
PCMCIA card to your PC system:
2
PCMCIA card into the PCMCIA slot.
Finish
.
2
/PC interface connector to the exposed socket on the PCMCIA card.
2
hsb
2
transceiver cable from the hsb
2
/PC interface to your hsb
2
chain has an in-line terminator fitted.
RayTech RNS - Getting Started
2
system.