Raymarine RayTech RNS 5.0 Getting Started page 20

16
6. Check
selected program.
Your RNS software can now be installed from either a CD-ROM or downloaded directly
from the Internet.
Installation from a CD
To install RNS using a CD-ROM:
1. Insert the RNS CD into the computer's CD-ROM drive. After a few moments the
Install Shield Wizard Welcome screen is displayed.
2. Click
If the Install Shield Wizard does not automatically run;
1. Select Start/Run from the computer taskbar and type e:\setup.exe
(substitute the drive letter of your CD-ROM drive for 'e' if it is different). After a few
moments the Install Shield Wizard Welcome screen is displayed.
2. Click
Installation from the internet
To install RNS from the internet:
1. Point your internet browser to http:///www.raymarine.com/RayTech software
2. Follow the on-screen instructions.
RNS is a very large file (85mb). Dial-up connections are not recommended for this oper-
Note:
ation.
Using RNS for the first time
License keys
To operate RNS with your boat's instruments and use the advanced features, it is
necessary to purchase a license key. There are two types of license key that can be
purchased for RNS:
• 5.0 Upgrade License - this type of key is required if you are upgrading to RNS
V5.0 from a previous version.
• 5.0 License - this type of key is included when you purchase RNS V5.0.
Both types of key can be purchased from
Remove Next
. Click
Next,
and follow the on-screen instructions.
Next
, and follow the on-screen instructions.
. Follow the on-screen instructions to remove the
http;///www.raymarine.com/RayTech
RayTech RNS - Getting Started
.