Pwidth; Risetime - Agilent Technologies 16533A 1-GSa/s Programmer's Manual

PWIDth?

Query
:MEASure:[SOURce CHANnel<N>;]PWIDth?
The PWIDth query makes a positive pulse width measurement on the
selected channel. The measurement is made by finding the time difference
between the 50% points of the first rising and the next falling edge displayed
on screen.
Returned Format
[:MEASure:PWIDth] <value><NL>
<N> 1 through the number of channels in the oscilloscope connected as one unit
(maximum of 8 channels), otherwise the maximum number of channels is 2
positive pulse width in seconds
<value>
Example
OUTPUT XXX;":MEASURE:SOURCE CHANNEL2;PWIDTH?"

RISetime?

Query :MEASure:[SOURce CHANnel<N>;]RISetime?
The RISetime query makes a risetime measurement on the selected channel
by finding the 10% and 90% voltage levels of the first rising edge displayed on
screen.
Returned Format
[:MEASure:RISetime] <value><NL>
<N> 1 through the number of channels in the oscilloscope connected as one unit
(maximum of 8 channels), otherwise the maximum number of channels is 2
<value> risetime in seconds
Example
OUTPUT XXX;":MEASURE:SOUR CHAN1;RISETIME?"
MEASure Subsystem
PWIDth?
7–9