Conditional Access; Upgrade By Usb; Local Network Settings - Ferguson ARIVA 100 User Manual

13.4 Conditional access

In this menu you can obtain additional information about the subscriber's card in the card
reader. The information presented depends on the type and version of your card. Card initial
clock is by default is set to 6MHz but if you have any problems with card splitter systems you
can try to slow it down to 3,6MHz. Change require receiver reboot!

13.5 Upgrade by USB

This menu is used to update the receiver. The latest software is available on the manufacturer's
website. The downloaded file needs to be unpacked and recorded to an external USB memory
device. Next, select it by means of the LEFT/RIGHT buttons and press start in order to
commence the update.

13.6 Local network settings

This menu serves to configure addresses and DNS servers. These options concern the Ethernet
port, which enables the exchange of data over the network.
26