Chapter 2
Figure 2-14. Attaching the LCD Assembly
CAUTION
When you attach the LCD assembly to the HP NetServer, be
careful not to pinch the LCD cables between the LCD
assembly and the front of the HP NetServer.
7. Position the slots on the rear half of the LCD cover over the posts on the
processor tray. Gently push the LCD assembly onto the posts and then
push the assembly firmly downward to attach it and engage the retaining
spring.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Hole in Processor Tray
for LCD Cables
(HP NetServer LXr 8500 Shown)
Preparing the HP NetServer
Post (4 Places)
LCD Assembly
23