HP NetServer LXr 8500 Installation Manual page 11

Chapter 1
Be sure that the stabilizing, anti-tip feature is installed on the rack enclosure in
which you are installing the HP NetServer. This feature consists of two "feet" at
the front of the base of the enclosure and, if you are installing this HP NetServer
in a single rack enclosure, two "feet" each on the left and right sides of the
enclosure (see Figure 1-2).
6
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Side Stabilizing
"Feet"
(Both Sides)
Figure 1-2. Single Rack Enclosure With the Anti-Tip
Stabilizing Feature Installed
Introduction
Front Stabilizing
"Feet"