Download Print this page
Time4Sleep NEW ENGLAND OTTOMAN STORAGE BED DOUBLE AND KING SIZE Quick Start Manual

Time4Sleep NEW ENGLAND OTTOMAN STORAGE BED DOUBLE AND KING SIZE Quick Start Manual

Advertisement

Quick Links

IMPORTANT: BEFORE STARTING TO ASSEMBLE THE BED - PLEASE READ THESE INSTRUCTIONS CAREFULLY.
An instructional video of the Operation of the Ottoman Lift Up system is available via YouTube using
the following address:
Parts Identification
1
3
Parts Checklist
Ref.
Description
1
Headboard
2
Footboard
Side rail - left
3
Side rail - right
4
Cross rail (wooden)
5
6
Fabric base cover
221115
HEADEND
4
5
5
2
6
Qty
1
1
1
1
2
1
Page 1 of 11
NEW ENGLAND OTTOMAN STORAGE BED
DOUBLE AND KING SIZE
PLEASE READ this sheet prior to assembly to familiarise
yourself with the various stages of construction. Carefully
open the pack supplied and check the contents against the
parts and fittings check list.
Do not destroy any of the packaging until you are certain
that you have all the necessary parts for the assembly.
Please ensure that the packaging is disposed of in
a safe environmentally friendly way.
CAUTION: There are small components used in the
construction of this unit. These loose items should be
kept away from young children during assembly, to avoid
the danger of choking.
https://youtu.be/hyq4zm7h_yU
8
FOOTEND
9
Ref.
Description
Angled corner brackets
7
Metal slat frame
8
9
Cross bar
10
Mattress stoppers
FABRIC HAND STRAP
10
7
Qty
2
1
1
2

Advertisement

loading
Need help?

Need help?

Do you have a question about the NEW ENGLAND OTTOMAN STORAGE BED DOUBLE AND KING SIZE and is the answer not in the manual?

Questions and answers

Summary of Contents for Time4Sleep NEW ENGLAND OTTOMAN STORAGE BED DOUBLE AND KING SIZE

  • Page 1 NEW ENGLAND OTTOMAN STORAGE BED DOUBLE AND KING SIZE PLEASE READ this sheet prior to assembly to familiarise yourself with the various stages of construction. Carefully open the pack supplied and check the contents against the parts and fittings check list. Do not destroy any of the packaging until you are certain that you have all the necessary parts for the assembly.
  • Page 2: Additional Tools Required

    Fittings Checklist HARDWARE NEEDED FOR BED ASSEMBLY (PACK A) Ref. Description Ref. Description Threaded studs (M8x80mm) for Spanner (for M8 nut) fitting side rails (3&4) to headboard & footboard (1&2) Nut for M8 bolt Dowel (M8 x30mm) Half moon spacer Wood screw Spring washer (for M8 bolts) Flange lock-nuts (M8)
  • Page 3 Warning • You must ensure that the mattress is on the bed frame before operating the lift mechanism – failure to do so could result in injury. • Keep hands clear of the mechanism when opening or closing the ottoman. •...
  • Page 4 Bed Assembly - Use Pack 'A' Stage A x 4 Stage A x 4 Page 4 of 11...
  • Page 5 Stage K x 8 K x2 K x2 K x2 K x2 K x2 Page 5 of 11...
  • Page 6 Stage L x 8 L x2 L x2 L x2 L x2 Stage B x 8 C x 8 D x 8 J x 1 Page 6 of 11...
  • Page 7 Stage H x 8 E x 8 D x 8 I x 1 Stage F x 8 E x 8 l x 1 D x 8 Page 7 of 11...
  • Page 8 Bed Assembly - Use Pack 'B' Stage Fitting position for cross Bar (9) is clearly iii) labeled. Pass bar through metal slat frame Using four sets of bolts (H) , spring washer (D) & (8) between first & second slat. flat washers (E) fit the metal connection plates (N) Carefully open the frame.
  • Page 9 Stage With help from your assistant, lift the slat frame (8) onto slat frame support bars aligning first set of holes on slat frame with first set of holes in support bars (nearest the headboard). Using three bolt sets on each side (G), (E), (E), (D) &...
  • Page 10 Stage During this next step, the assistant should hold up the slat frame. To the hinges on side rails (3&4), slide gas-lift piston stems (X) onto the axles (Y) then fit the flange lock-nuts (M). Do not over-tighten, a small gap must be left so stems can swivel freely, this is important, see sketch below left.
  • Page 11 Note: Be very careful what you store under the bed - the top of an item, like a suitcase or a box, must not touch the slats or the y may be damaged. Maximum storage height is 270 mm. 1 Before lifting the slat frame, place your mattress on top of the slats as without a mattress in place the speed of movement is quick and may cause injury so be careful.