Description Of The Controls; Accessory Installation - Hyundai HB 960 Instruction Manual

Stick blender
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 17
• Switch off the appliance before changing accessories or approaching parts which move in use.
• Don't touch the sharp blades.
• The blades are very sharp! Handle with care.
• Short-time operating. Use the appliance for no longer than 2 minute, and don't operate hard
food for no longer than 15 seconds.
• Be careful when pouring hot liquid into the food processing device or
the mixer because it may spurt out of the appliance because of sudden
boil.
• In case you are going to process hot liquid (mixing a hot soup with
vegetables etc.), be careful because it may spurt out of the container
because of sudden boil.

DESCRIPTION OF THE CONTROLS

P1
Motor unit
P2
Switch I - speed 1
P3
Switch II Turbo
P4
Blender stick
P5
Measuring bowl
INSTRUCTION FOR USE

ACCESSORY INSTALLATION

Insert the k attachment in the motor unit so that arrow facing to open symbol (Fig.1). Then screw
the shaff in the direction shown by the locked symbol (Fig.2), using gentle hand pressure only
ensures that the Shift is fully fightened on to the motor unit. To disassemble the attachment,
proceed inversely.
Fig.1
ENG - 18
Fig.2

Advertisement

Table of Contents
loading

Table of Contents