Description Of The Controls - Hyundai HB 930 Instruction Manual

Description of the controls

P1 Motor unit
P2 Switch I - speed 1
P3 Switch II Turbo
P4 Blender stick
P5 Measuring bowl
Instruction for Use
Accessory Installation
Insert the k attachment in the motor unit so that arrow facing to open symbol (Fig.1). Then screw
the shaff in the direction shown by the locked symbol (Fig.2), using gentle hand pressure only
ensures that the Shift is fully fightened on to the motor unit. To disassemble the attachment,
proceed inversely.
Fig. 1 Fig.2
ENG - 15
ENG