Table of Contents
Advertisement
Step 7. Attaching the toe kick (if applicable)
When fitting the kickboard, choose a size best
suited to the installation. Start by testing the high
kickboard. If the dishwasher door hits the kick
board when opened, change to the lower kick
board. For installations with a worktop height of
900 mm, the higher kickboard is recommended.
For installations with a worktop height of 850 mm,
the lower kickboard is recommended.
1. Attach the supplied sound insulation material
to the back of the kickboard (certain models
only). If you use the low kickboard, adjust the
height of the insulation material by removing
the thin strip.
2. Loosen the holders for the kickboard by mo
ving the grey catches to the side.
3. Adjust the holders (pull out or push in) until
they are on a level with the surrounding kit
chen plinth.
Adjust the height of the insulation material
3
2
Advertisement
Table of Contents
