Table of Contents
Advertisement
Changing the clock
No other time-setting option should have been set.
Press the
0
button four times.
1.
The time symbols light up in the display and the brackets are
around
.
0
Childproof lock
The oven has a childproof lock to prevent children switching it
on accidentally.
The oven will not react to any settings. The timer and clock can
also be set when the childproof lock has been activated.
If the type of heating and temperature or grill setting have been
set, the childproof lock interrupts the heating.
Activating the childproof lock
No cooking time or end time should have been set.
Changing the basic settings
Your oven has various basic settings. These settings can be
customised to suit your requirements.
Basic setting
c1 Clock display
c2 Signal duration upon
completion of a
cooking time or
timer period
c3 Waiting time until a
setting is applied
* Factory setting
No other time-setting option should have been set.
Care and cleaning
With good care and cleaning, your oven will remain clean and
fully-functioning for a long time to come. Here we will explain
how to maintain and clean your oven correctly.
Notes
Slight differences in the colours on the front of the oven are
■
caused by the use of different materials, such as glass,
plastic and metal.
Shadows on the door panel which look like streaks, are
■
caused by reflections made by the oven light.
Enamel is baked on at very high temperatures. This can
■
cause some slight colour variations. This is normal and does
not affect their function. The edges of thin trays cannot be
completely enamelled. As a result, these edges can be
rough. This will not impair the anti-corrosion protection.
10
Selection 1 Selection 2 Selection 3
always*
only with
-
the
but-
0
ton
approx.
approx.
approx.
10 second
2 minutes*
5 minutes
s
approx.
approx.
approx.
2 seconds
5 seconds*
10 second
s
Use the
@
or
A
button to change the clock.
2.
After a few seconds, the time that has been set is adopted.
Hiding the clock
You can hide the clock. For more information, please refer to
the section Changing the basic settings.
Press and hold the
button for approx. four seconds.
D
The
symbol appears in the display. The childproof lock is
D
activated.
Deactivating the childproof lock
Press and hold the
D
button for approx. four seconds.
The
D
symbol goes out in the display. The childproof lock is
deactivated.
Press and hold the
0
button for approx. 4 seconds.
1.
The current basic setting for the clock display is shown in the
display, e.g. c1 1 for selection 1.
Use the
@
or
A
button to change the basic setting.
2.
Confirm by pressing the
3.
The next basic setting appears in the display. You can scroll
through all levels with the
with the
or
button.
@
A
To finish, press and hold the
4.
All basic settings are applied.
You may change the basic settings at any time.
Cleaning agents
To ensure that the different surfaces are not damaged by using
the wrong cleaning agent, observe the information in the table.
Do not use
sharp or abrasive cleaning agents,
■
cleaning agents with a high concentration of alcohol,
■
hard scouring pads or sponges,
■
high-pressure cleaners or steam cleaners.
■
Wash new sponge cloths thoroughly before use.
button.
0
0
button and change the setting
button for approx. 4 seconds.
0
Advertisement
Table of Contents
