Childproof Lock - Bosch HRA534BS0 User Manual And Installation Instructions

¡ Food will spoil if you leave it in the cooking com-
partment too long.
Requirements
¡ The type of heating and temperature or setting are
set.
¡ A cooking time is set.
Press the button repeatedly until
1.
in the display.
Press the or button.
2.
a The display shows the calculated end time.
Use the or button to delay the end time.
3.
a After a few seconds, the appliance applies the set-
ting and the display shows the set end time.
a Once the calculated start time has been reached,
the appliance starts heating up and the cooking
time starts counting down.
a Once the time has elapsed, an audible signal
sounds and the display shows the cooking time as
zero.
When the cooking time has elapsed:
4.
Press any button to end the signal prematurely.
‒
To set another cooking time, press the
‒
When your food is ready, switch off the appli-
‒
ance.
Changing the end time
In order to achieve a good cooking result, you can only
change the set end time before operation starts and
the cooking time starts counting down.
is highlighted on the display.
Requirement:
11 Childproof lock
You can secure your appliance to prevent children
from accidentally switching it on or changing the set-
tings.
Note: After a power cut, the childproof lock is deactiv-
ated.
12 Cleaning and servicing
To keep your appliance working efficiently for a long
time, it is important to clean and maintain it carefully.
12.1 Cleaning products
In order to avoid damaging the various oven surfaces
on the appliance, do not use unsuitable cleaning
products.
WARNING ‒ Risk of electric shock!
An ingress of moisture can cause an electric shock.
Do not use steam- or high-pressure cleaners to
▶
clean the appliance.
▶
a The appliance applies the change after a few
Cancelling the end time
You can delete the set end at any time.
Requirement:
is highlighted
▶
a After a few seconds, the appliance applies the
10.5 Setting the time on the clock
Once the appliance has been connected to the mains
or following a power failure, the time flashes on the dis-
play. The time starts at "12:00". Set the current time.
Requirement: The function selector must be set to the
"Off" position ⁠ .
1.
2.
button.
a The time that is set appears on the display.
Changing the time on the clock
You can change the time on the clock at any time.
Requirement: The function selector must be set to the
"Off" position ⁠ .
1.
2.
a The appliance applies the change after a few
11.1 Activating and deactivating the

childproof lock

Requirement: The function selector must be set to the
"Off" position ⁠ .
▶
ATTENTION!
Unsuitable cleaning products may damage the sur-
faces of the appliance.
▶
▶
▶
▶
Use the or button to delay the end time.
seconds.
is highlighted on the display.
Reset the end time to the current time plus the set
cooking time using the
change and starts heating up. The cooking time
counts down.
Use the or button to set the time.
Press the button.
Press and hold the button until the clock flashes
on the display.
Use the or button to change the time.
seconds.
To activate the childproof lock, press and hold the
button until appears in the display.
To deactivate the childproof lock, press and hold
‒
the button until
Do not use harsh or abrasive cleaning products.
Do not use cleaning products with a high alcohol
content.
Do not use hard scouring pads or cleaning
sponges.
Do not use any special cleaners for cleaning the ap-
pliance while it is hot.
Childproof lock en
button.
goes out in the display.
13