Assembly - ICON Health & Fitness Pro-Form Cadence WLT User Manual

ASSEMBLY

1. To use the assembly steps in this manual, first see the helpful tips below.
• To hire an authorized service technician to
assemble the treadmill, call 1-800-445-2480.
• Assembly requires two persons.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you fi nish all assembly steps.
• After shipping, there may be an oily substance
on the exterior of the treadmill. This is normal. If
there is an oily substance on the treadmill, wipe
it off with a soft cloth and a mild, non-abrasive
cleaner.
2. Make sure that the power cord is unplugged.
With the help of a second person, set the tread-
mill on a piece of packaging on the floor. Tip the
treadmill onto its left side, and position the Left
and Right Uprights (69, 70) as shown.
Next, identify the Left Base Leg (73). Orient the
Left Base Leg as shown, and attach it with two
M10 x 75mm Screws (1) and two M10 Black Star
Washers (14); start both Screws, and then
tighten them.
• Left parts are marked "L" or "Left" and right parts
are marked "R" or "Right."
• To identify small parts, see page 7.
• Assembly requires the following tools:
the included hex keys
one Phillips screwdriver
one adjustable wrench
To avoid damaging parts, do not use power tools.
2
70
69
8
14
73
1