ICON Health & Fitness Pro-Form Cadence LT2.5 User Manual page 19

THE INFORMATION MODE
The console features an information mode that keeps
track of treadmill usage information and allows you to
view and change the console settings.
1. Select the information mode.
To select the information mode, insert the key into
the console while holding down the Stop button.
Then, release the Stop button. Note: If a workout
has been selected, you may need to press the Stop
button twice to exit the workout before you can
access the information mode. When the informa-
tion mode is selected, the following information will
be shown:
The upper display will show the software version of
the console.
An "E" for English miles or an "M" for metric kilo-
meters will appear in the lower right display. To
change the unit of measurement, press the Speed
increase button.
2. Navigate the information mode.
While the information mode is selected, you can
navigate through several screens. Press the Stop
button repeatedly to select the desired screen.
3. Change settings as desired.
Incline System Calibration—The letters INC will
appear in the upper display, and the letters UP and
DN will appear in the lower displays. If the incline
system is not functioning properly, it may need to
be calibrated. To calibrate the incline system, press
the Incline increase or decrease button. The tread-
mill will automatically rise to the maximum incline
level and then return to the minimum level. When
the treadmill stops moving, the incline system is
calibrated.
Display Test—This screen is intended to be used
by service technicians to identify whether the
display is working correctly.
Button Test—This screen is intended to be used
by service technicians to identify whether a certain
button is working correctly.
Demo Mode—The currently selected demo mode
option will appear in the display. The console
features a demo mode, designed to be used if the
treadmill is displayed in a store. If the demo mode
is turned on, the console will not turn off and the
display will not be reset when you fi nish exercis-
ing. Press the Speed increase button to toggle the
demo mode on or off.
To exit the information mode, remove the key from the
console, or press stop repeatedly.
19