Scotsman Prodigy ELITE A Series Installation And User Manual
Hide thumbs
Also See for Prodigy ELITE A Series:
- Installation and user manual (22 pages) ,
- Installation and user manual (22 pages) ,
- Installation and user manual (22 pages)
Related Manuals for Scotsman Prodigy ELITE A Series
Summary of Contents for Scotsman Prodigy ELITE A Series
- Page 1 Installation and User’s Manual for Remote Condenser Modular Cube Prodigy ELITE® A Series Model MC2648...
-
Page 2: Table Of Contents
The Maintenance section contains the In addition, the Scotsman ICELINQ® app allows users instructions and schedules for the sanitation and to connect to the machine via Bluetooth® to monitor, cleaning of the machine. -
Page 3: Installation: Product Specifications
MC1448, MC1848, MC2148 Remote Cooled User Manual Installation: Product Specifications Location Limitations Power Supply This ice system is made up of three parts, the ice Minimum Maximum making machine, or head; the remote condenser; and 208-230 volt 198 volts 253 volts the interconnecting tubing. -
Page 4: Model Number Description
Scotsman. listed there. Scotsman reserves the right to make design changes Options: and/or improvements at any time. Specifications and There are several options available for field design are subject to change without notice. -
Page 5: Product Description And Electrical Requirements
If refrigeration circuits must be connected. They are connecting remote condenser independently of the designed to be connected using Scotsman refrigerant ice machine, use the information on the condenser's tubing, supplied in kits of liquid and discharge tubes. -
Page 6: Cabinet Layout
MC1448, MC1848, MC2148 Remote Cooled User Manual Cabinet Layout June 2022 Page 5... -
Page 7: Water
Adjustments of purge due to local water conditions are not covered by warranty. A triple head filter is recommended. Either the Scotsman SSM3 taste and odor filter system, or the ADS-AP3 AquaPatrol system. Water flow is 2.5 GPM when filling the reservoir. -
Page 8: Panel Removal
MC1448, MC1848, MC2148 Remote Cooled User Manual Panel Removal 1. Locate and disengage the two quarter turn captured screws at the bottom of the front panel. 2. Pull the front panel out at the bottom. 3. Lift the front panel up and off the machine. 4. -
Page 9: Remote Condenser Location
Use the following for planning the placement of the Configurations that do NOT meet these requirements condenser relative to the ice machine must receive prior written authorization from Scotsman. Location Limits - condenser location must not exceed ANY of the following limits: Do NOT: •... -
Page 10: For The Installer: Remote Condenser
MC1448, MC1848, MC2148 Remote Cooled User Manual For The Installer: Remote Condenser Locate the condenser as near as possible to the Roof Attachment interior location of the ice machine. Install and attach the remote condenser to the roof Note: The location of the condenser is relative to the of the building, using the methods and practices of ice machine is LIMITED by the specification on the construction that conform to the local building codes,... -
Page 11: Line Set Routing And Brazing
MC1448, MC1848, MC2148 Remote Cooled User Manual Line Set Routing and Brazing Do not connect the refrigerant tubing until all routing and forming of the tubing is complete. Note: Be sure tube and stubs are round, dress with Final connections requires brazing, steps must swage tool if needed. -
Page 12: Plumbing Requirements
MC1448, MC1848, MC2148 Remote Cooled User Manual Plumbing Requirements All models require connection to cold, potable water. 1. Connect water supply to water inlet fittings. A hand actuated valve within site of the machine 2. Connect drain tubing to drain fitting. is required. -
Page 13: Electrical
MC1448, MC1848, MC2148 Remote Cooled User Manual Electrical The machine is not supplied with a power cord, one Electrical connections are made inside the junction must either be field installed or the machine hard- box in the back panel of the ice machine. wired. -
Page 14: Final Check List
MC1448, MC1848, MC2148 Remote Cooled User Manual Final Check List: 1. Is the unit located indoors in a controlled Lower Light and Switch Panel environment? This user accessible panel provides important 2. Is the condenser located where it can receive operational information and duplicates the lights and adequate cooling air? switches on the controller. -
Page 15: Initial Start Up
13. Fill out and mail the warranty registration form or positions. Warm air will be discharged from the go on line at Scotsman’s website, www.scotsman- condenser coil. ice.com and register it there. -
Page 16: Adjustments
MC1448, MC1848, MC2148 Remote Cooled User Manual Adjustments Bridge Thickness - For the Service Tech Only Ice Bridge Thickness Measurement 1. Push and hold Off till the machine stops. Note: Indentations may be deeper on MC0322 and MC0330 2. Remove evaporator cover. 1/8-3/16”... -
Page 17: Use And Operation
Contact an authorized Scotsman service agent and have the machine When ice level drops, the ice machine will resume cleaned, de-scaled and sanitized. -
Page 18: Control Switches
The machine will fill up to that level and when it shuts process and then resume ice making. off the Bin Full indicator light will be On. Scan QR code to download the Scotsman ICELINQ™ App: Control Options There are two optional, field installed controls that can The cuber drops ice in large sections. -
Page 19: Cleaning, Sanitation And Maintenance
Preparing to Clean: Clean internal parts: 1. Remove the front panel. 6. Mix a cleaning solution of 6oz of Scotsman Clear 1 scale remover with 9 cups (72oz) of 105-115° F 2. Remove the evaporator cover. potable water. Scale Removal: 7. - Page 20 18. Push and release the “ON” button to resume ice making. Want more detail? Scan QR Code to download the Scotsman IcelinQ™ App to connect to this machine via Bluetooth and access the self-guided cleaning process. Exterior Panels Fingerprints, dust and grease will require cleaning with a good quality stainless steel cleaner.
-
Page 21: What To Do Before Calling For Service
Scotsman ICELINQ® Mobile App should start in a few minutes. To Manually Reset the machine. All Prodigy ELITE® models are Bluetooth® enabled and are compatible with the Scotsman ICELINQ® • Open the switch door app, available on both the Apple App Store and •... - Page 22 SCOTSMAN ICE SYSTEMS 101 Corporate Woods Parkway Vernon Hills, IL 60061 www.scotsman-ice.com 800-726-8762 17-3758-01...
Need help?
Do you have a question about the Prodigy ELITE A Series and is the answer not in the manual?
Questions and answers