Table of Contents
Advertisement
The mark on the left means suitable for
cleaning under an open water tap.
Warning
Disconnect the power cord from the shaver before
cleaning it in water to prevent electric shock.
Lubrication
To maintain shaving comfort for a long time, it is
recommended that the oil provided with the shaver is
used.
1. Switch off the shaver.
2. Apply one drop of oil to each of the
outer foils.
3. Raise the trimmer and apply a drop of
oil.
4. Switch the shaver on, and run it for
approximately five seconds.
5. Switch off the shaver, and wipe off any
excess oil from the outer foils with a
soft cloth.
16
Cleaning with the brush
Clean the inner blades using
the short brush by moving it
in direction (A).
Clean the system outer foil,
the shaver body and the
trimmer using the long brush.
•
Do not move the short brush
in direction (B) as it will
damage the inner blades
and affect their sharpness.
•
Do not use the short brush
to clean the outer foils.
(A)
(B)
Advertisement
Table of Contents
