1 Warning Caution: • Pb free solder has a higher melting point that standard solder; Typically the melting point is 50 - 70°F (30 - 40°C) higher. Please use a soldering iron with temperature control and adjust it to 750 ± 20°F (400 ± 10°C). In case of using high temperature solder- ing iron, please be careful not to heat too long.
3 Disassembly Instructions Follow the procedure below to disassemble the main body. (a) Loosen a screw. (b) Remove the bottom cover (c) Push up the blade of trimmer. (d) Loosen a screw. (e) Remove the upper rear panel. (f) Loosen two screws. (g) Remove the rear panel.
5 Exploded View and Replacement Parts List Model No. : ES-LF50 Exploded View...
Page 6
Model No. : ES-LF50 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks WESLF70X7158 PROTECTIVE CAP WESLF50S0048 OUTER FOIL FRAME WES9167E OUTER FOIL WES9068E INNER BLADE WESLF50L1008 LINEAR MOTOR ASSEMBLY WES8258L1087 TRIMMER DRIVING BAR WES8258L1077 SLIT BLADE DRIVING BAR...
Need help?
Do you have a question about the ES-LF50 and is the answer not in the manual?
Questions and answers