Vf Assembly; Disassembly/Assembly Of E.vf Assembly (For The B/W Vf) - JVC GR-DVL365EG Service Manual

5
1.5 E. VF ASSEMBLY
1.5.1 Disassembly/assembly of E.VF assembly
(for the B/W VF)
1. Remove the EYE CUP.
2. Remove the three screws (1 to 3) and then remove the
CASE B (VF).
3. Remove the screw (4) to remove the LEVER (VF) and pull
out the LENS ASSY.
5
Note a: Be careful not to lose the SPRING (VF).
4. Remove the three screws (5 to 7) and then remove the
VF HINGE ASSY.
5
Note b: Be careful not to damage the FPC and not to
break any wires during the operation.
VF HINGE ASSY
∗ 5
(S c)
5
∗ 6
∗ 7
(S 5 c)
(S c)
5
1-8
HOLDER LCD (VF)
(L c)
5
CASE A (VF)
∗ 3
∗ 2
(S
(S 5 a)
CAP (VF)
∗ 8
(S d)
5
5. Remove the screw (8) and the remove the CAP (VF).
6. Remove the FPC from the CASE A (VF) so that the CASE
A (VF) may be unlocked.
7. Remove the HOLDER LCD (VF) while unlocking it by the
both side.
CASE B (VF)
LENS ASSY
SPRING (VF)
Note
(L b)
5
FPC
Note 5 b
5 a)
∗
: 0.078 N
Fig. 1-5-1
EYE CUP
∗ 1
(S 5 a)
(L a)
5
LEVER (VF)
∗ 4
(S b)
5
5 a
m (0.8 kgf cm)
• •