E. Vf Assembly (B/W); Disassembly/Assembly Of E.vf Assembly (For The B/W Vf) - JVC GR-VF10EG Service Manual

#
1.5

E. VF ASSEMBLY (B/W)

1.5.1 Disassembly/assembly of E.VF ASSEMBLY
(for the B/W VF)
1. Remove the EYE CUP.
2. Remove the three screws (1 to 3) and then remove the
CASE B (VF).
3. Remove the screw (4) to remove the LEVER (VF) and pull
out the LENS ASSY.
#
Note a: Be careful not to lose the SPRING (VF).
4. Remove the three screws (5 to 7) and then remove the
VF HINGE ASSY.
#
Note b: Be careful not to damage the FPC and not to
break any wires during the operation.
VF HINGE ASSY
∗∗ 5
(S c)
13
∗∗ 6
∗∗ 7
(S 13 c)
(S c)
13
1-10
HOLDER LCD (VF)
(L c)
13
CASE A (VF)
∗ 3
∗ 2
(S 13
(S 13 a)
CAP (VF)
∗ 8
(S d)
13
5. Remove the screw (8) and the remove the CAP (VF).
6. Remove the FPC from the CASE A (VF) so that the CASE
A (VF) may be unlocked.
7. Remove the HOLDER LCD (VF) while unlocking it by the
both side.
CASE B (VF)
LENS ASSY
SPRING (VF)
Note
(L b)
13
FPC
Note 13 b
a)
∗
: 0.098 N
∗∗
: 0.078 N
Fig. 1-5-1
EYE CUP
∗ 1
(S 13 a)
(L a)
13
LEVER (VF)
∗ 4
(S b)
13
13 a
m (1.0 kgf cm)
• •
m (0.8 kgf cm)
• •