Cisco Threat Grid M5 Maintenance Manual page 6

Maintenance and Upgrades
Remove and Replace a Power Supply
a) Grasp the power supply handle while pinching the release lever toward the handle.
b) Pull the power supply out of the bay.
Figure 3: Remove and Replace the AC Power Supply
1 Release lever 2 Handle
Step 2
Install a new power supply:
a) Grasp the power supply handle and insert the new power supply into the empty bay.
b) Push the power supply into the bay until the release lever locks.
c) Connect the power cord to the new power supply.
d) If you shut down the Threat Grid M5, press the Power button to return it to main power mode.
Maintenance and Upgrades
6