Cisco Threat Grid M5 Maintenance Manual page 3

Maintenance and Upgrades
Warning
Statement 1073 No User-Serviceable Parts
There are no serviceable parts inside. To avoid risk of electric shock, do not open.
Warning
Statement 1074 Comply with Local and National Electrical Codes
To reduce risk of electric shock or fire, installation of the equipment must comply with local and national
electrical codes.
Step 1 Remove the drive that you are replacing:
a) Press the release button on the face of the drive tray.
b) Grasp and open the ejector lever and then pull the drive tray out of the slot.
Figure 1: Remove the Drive
1 Ejector handle
Step 2 Remove the four drive-tray screws that secure the drive to the tray and then lift the drive out of the tray.
2 Release button
Maintenance and Upgrades
Remove and Replace a Drive
3