Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Hans Grohe AXOR Starck 10402 1 Series
Summary of Contents for Hans Grohe AXOR Starck 10402 1 Series
- Page 1 Installation Instructions / Warranty Starck Tub Filler 10402XX1...
- Page 2 Starck Tub Filler 10402XX1 Technical Specification Maximum incoming water pressure 145 psi Recommended water pressure 14.5 - 72 psi Recommended max. incoming hot water temp. F - 140 Flow rate of tub filler @ 45 psi 5.75 gpm Flow rate of handshower 2.5 gpm Backflow prevention furnished by check valve in the handspray outlet and automatically closing diverter...
- Page 3 Installation • Flush the supply lines for at least 5 minutes before installing the tub filler. Damage to the cartridge caused by debris is not covered under the Hansgrohe warranty. • Wrap the threads on the S-connectors with Teflon® thread tape. Screw the S- connectors into the female fittings and 1 3/8”...
- Page 4 User Instructions • Pivot the lever upward to turn the water on, down to turn it off. Pivot the handle left to obtain warmer water, to the right to obtain cooler water. • When the unit is turned on, the water will come from the tub filler. Pull the diverter knob to obtain water from the handshower When the water is turned off, the diverter will automatically reset to the tub filler position.
- Page 5 • Remove the handle screw. Pull the green high temperature limit stop straight off the cartridge. • Reinstall the high temperature limit stop so that the positioning pin on the cartridge is in the hole for the desired high temperature. The temperatures shown on the diagram assume an incoming cold water temperature of F and an incoming hot water...
- Page 6 Cleaning Recommendation for Hansgrohe Products Modern faucetry and shower products utilize a combination of materials to comply with the needs of the market with regard to design and functionality. To avoid damage, it is necessary to use some caution when cleaning. Damage caused by improper treatment is not covered under the Hansgrohe warranty.
- Page 7 THIS WARRANTY DOES NOT COVER, AND HANSGROHE WILL NOT PAY FOR: Conditions, malfunctions or damage not resulting from defects in material or workmanship. Conditions, malfunctions or damage resulting from (1) improper installation, improper maintenance, misuse, abuse, negligence, accident or alteration, or (2) the use of abrasive or caustic cleaning agents or “no rinse” cleaning products, or the use of the product in any manner contrary to the product instructions.
- Page 8 • • Hansgrohe, Inc. 1490 Bluegrass Lakes Parkway Alpharetta, GA 30004 • Tel. 770 360-9880 Fax 770 360 9887 www.hansgrohe-USA.com...
Need help?
Do you have a question about the AXOR Starck 10402 1 Series and is the answer not in the manual?
Questions and answers