Operation/Diagnostics/Troubleshooting - Golden LiteRider ENVY Owner's Manual

VII. OPERATION
MANDATORY! Read and follow the owner's manual.
Your LiteRider Envy is simple to operate. However, for your safety and the safety of
others, Golden Technologies, Inc. recommends that you carefully read and understand
the following operating instructions. We also recommend that you practice operating
your LiteRider Envy in an area free of any obstacles. Once you have gained confidence in
your ability to control your power chair, you will more easily be able to operate it in
normal daily conditions.
Before turning on the power of your LiteRider Envy, take note of your
environment and set your speed control accordingly. (See "Speed Control Buttons" figure
15 on page 24) For indoor driving, we recommend that you select the lowest speed
setting. For outdoor driving, we recommend that you select a speed setting at which you
feel comfortable, safe, and in control of your power chair. Familiarize yourself with the
features of your LiteRider Envy described below and follow the instructions to safely
operate your power chair.
DRIVING: The Joystick On/Off Switch
Push the on/off button to turn on the power to your LiteRider Envy. See figure 15 on
page 24. The 10 LEDs will flash once and a number of LEDs will remain depending on
the state of the battery charge.
♦ The LED (Light Emitting Diode) array, that functions as the battery charge gauge, will
light up. See "Battery Charging" on pages 30-31.
Pressing the on/off button again will turn off the power to your LiteRider Envy.
The Speed Control Buttons
These buttons provide you with a way to control the maximum speed of your LiteRider
Envy.
♦ Push the "Slow" button repeatedly to set your chair's speed to the slowest setting
(recommended for indoor operation). Slowest speed is indicated by one (1) lit LED section
on the speed indicator scale.
♦ Push the "Fast" button repeatedly to set your chair's speed to its highest setting.
Highest speed is indicated by five (5) lit LED sections on the speed indicator scale.
For your safety, the controller automatically sets the reverse speed,
acceleration, and deceleration in proportion to the speed control setting.
22