Pizza hut italian bistro pasta finishing tables (23 pages)
Summary of Contents for Randell 8148N
Page 1
Randell suggests that if you are suspicious of damage to make a notation on the delivery receipt. It will be the responsibility of the consignee to file a claim with the carrier.
Page 2
15……………………………………..……Troubleshooting page 16-19…………………………….…...Exploded Drawings page 20-22……………………………...Replacement Parts List Congratulations on your recent purchase of Randell food service equipment, and welcome to the growing family of satisfied Randell customers. Our reputation for superior products is the result of consistent quality craftsmanship.
Page 3
In addition, all Randell food service equipment is backed by some of the best warranties in the food service industry and by our professional staff of service technicians. Retain this manual for future reference. NOTICE: Due to a continuous program of product improvement, Randell reserves the right to make changes in design and specifications without prior notice.
Page 4
Authorized Service Agent (ASA). Any warranty work performed by a non-ASA will not be honored by Randell. A complete listing of current ASAs can be found on the Randell page of our web site : www.unifiedbrands.net. Warranties are effective from date of shipment, with a thirty day window to allow for shipment, installation and setup.
Page 5
2. Provide repair at the manufacturing facility by requiring that the defective unit be sent back to Randell freight prepaid. Perform repair at the expense of Randell and ship the item back to the customer freight collect. 3. Furnish complete condensing unit freight collect in exchange for the return of the defective compressor sent back freight prepaid.
Page 6
Verbal quotations are provided for customer convenience only and are considered invalid in the absence of a written quotation. Written quotations from Randell are valid for 30 days from quote date unless otherwise specified. Randell assumes no liability for dealer quotations to end-users.
Page 7
(www.doriandrake.com), Randell’s export management organization. *FOOTNOTES IN REFERENCE TO PARAGRAPHS ABOVE 1. Herein called Randell. 2. NET means list price less discount, warranty, labor policy, freight, Randell delivery and other miscellaneous charges. CASH DISCOUNTS WILL BE CALCULATED ON NET ONLY.
Page 9
Randell has attempted to preset the cold controls to ensure that your unit runs at an optimum temperature, but due to varying ambient conditions, including elevation, food product as well as type of operation, you may need to alter this temperature.
Page 10
Figure 2 illustrates the evaporator blower coil assembly inside the lower refrigerated base. The thermostat adjustment knob is located at the top, front of the coil assembly. MORNING STARTUP (PREP RAIL) 1. Rail cleaning may be performed at this time. 2.
Page 11
Unit Operation (cont.) DRAWER REMOVAL AND INSTALLATION To remove and re-install individual drawers and drawer tracks, please refer to Figure 2 below for proper installation instructions. Figure 2 unifiedbrands.net...
Page 12
Preventive Maintenance Randell strongly suggests a preventive maintenance program which would include the following Monthly procedures: If a failure of the equipment is a direct result of any of the Preventative Maintenance guidelines being neglected the repairs will not be covered under warranty.
Page 13
For a complete listing of current Randell ASA please visit Randell believes strongly in the products it manufactures and backs those products with one of the best warranties in the industry. We believe with the proper maintenance and use, you will realize a profitable return on your investment and years of satisfied service.
Page 15
SYMPTOM POSSIBLE CAUSE Unit doesn't run 1. No power to unit 2. Temperature control turned off 3. Temperature control faulty 4. Compressor overheated 5. Condenser fan faulty 6. Overload protector faulty 7. Compressor relay faulty 8. Compressor faulty Unit short cycles 1.
Page 16
Replacement 8000N Series – exploded view Parts 800-621-8560...
Page 17
Replacement 8000N Series – exploded view Parts Drawer Assembly unifiedbrands.net...
Page 18
Replacement 8000N Series – exploded view Parts Mechanical area 800-621-8560...
Page 19
Replacement 8000N Series – exploded view Parts Evaporator Coil Assembly unifiedbrands.net...
Page 20
Replacement Part List ITEM DESCRIPTION 6" caster w/ break 6" caster w/o break 4" caster w/ break 4" caster w/o break 6" leg w/ bullet foot s/s back panel 48" s/s back panel 60" s/s back panel 68" s/s back panel 83" s/s back panel 95"...
Page 21
21" Dwr front 24" Dwr front 27" Dwr front 27" Dwr front - 3 tier 21" Dwr frame 24" Drwr frame 27" Dwr frame 27" Dwr frame - 3 tier Drawer tracks (1L&1R) Dwr handle Dwr bearing Dwr bearing bolt Dwr gasket 11.3 x 18.75 Dwr gasket 11.3 x 21.75 Dwr gasket 11.3 x 24.75...