Dab - Radio; Selecting Dab Radio; Display; Automatic Station Search - T+A 2000 R Series User Manual

Table of Contents

Advertisement

DAB - Radio

Selecting DAB radio

Display

Automatic station search

Briefly tap the  button on the front panel of the MP 2500 R or the
 button on the SRC1 remote control handset, repeatedly if necessary,
until the source "DAB Radio" is displayed on the screen.

Depending on the frequency band (block), it may take up to two seconds to switch
stations when in DAB mode.
Since firmware version V1.10 the device supports DAB+ reception via the Swiss
cable TV network. For further information about updating the firmware, please
refer chapter „Software update".
a) Displays the type of reception currently in use.
b) Hear the music type or style is displayed, e.g. Pop Music.
This information is only displayed if the transmitting station broadcasts it as
part of the RDS system. If you are listening to a station which does not
support the RDS system, or only supports it in part, these information fields
remain empty.
c) The frequency and / or the station name is displayed in enlarged form. If a
station name is displayed, its frequency is shown in area 'e'.
d) These lines display information which is broadcast by the station (e.g.
Radiotext).
e) Display of Stereo ''.
The field strength  and therefore the reception quality to be expected
f)
from the set transmitting station can be assessed from the field strength.
g) Bit-rate of the broadcasting station when listening to DAB radio.
* The higher the bit-rate, the better the station's sound quality.
A long press on the  button on the front panel or on the  on the
SRC1 calls up the Station list menu. The following Select points are available:
If you wish to create a new station list, select the item "Create new list" and
confirm your choice with .
The station search begins, and automatically searches for all radio stations
which the machine is able to pick up.
If you wish to update an existing list, select the item "Add new stations".
The menu item "Sorting by ..." allows you to sort the stored list by any of
several criteria.
27

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mp 2500 r

Table of Contents