PART IDENTIFICATION CHART
Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the
key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it
has been preassembled. Extra parts may be included.
M4 x 12mm
#8 x 15mm
M4 x 16mm
M6 x 30mm
Screw (61)–2
Screw (37)–4
Screw (8)–4
Screw (45)–2
M6 x 40mm Screw
M8 x 16mm
M8 x 18mm
M8 x 30mm Screw
(40)–8
Screw (35)–4
Screw (46)–2
(65)–2
M8 x 55mm Screw
M10 x 68mm Screw
(55)–2
(67)–4
6