Commercial coffee grinder with dispenser (14 pages)
Summary of Contents for HeyCafe HC-880 LAB
Page 1
HC-880 VER2.1 – Manual book HC-880 Bulk Coffee Grinder OPERATING & SERVICE MANUAL HeyCafé Co., Ltd. Page 1 of 13 09/11/2017Ver.1...
Page 2
HC-880 VER2.1 – Manual book WARNINGS This Grinder is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the Grinder by a person responsible for their safety.
Grinder to be used by professional users at groceries, coffee shops, coffee roasters, espresso bars, hotels and restaurants. The HC-880 LAB grind’s whole been coffee into a container (not provided) with variable stepless grind setting dial, from super fine to course coffee powder.
HC-880 VER2.1 – Manual book General Description Beans hopper lid Main switch Grinding dial Grinder’s body Coffee powder outlet chute Over-load protector cover Residue tray UNPACKING AND INSTALLATION: Warning: All grinder’s technical handling operations such as installation, maintenance, or service should be performed by certified personnel or by your local dealer. 1.
HC-880 VER2.1 – Manual book OPERATION Operation controls Fig 5-1 1. Main Switch is a 3-way switch with Off, ON and Run positions (Fig 5-1). 2. The stepless grind setting knob is showing the current grinding setting. Turn the grind setting knob clockwise to achieve a finer grinding, or counterclockwise for coarser grinding.
The beans hopper is equipped with hands and fingers safety protector. Never remove the safety protector while the HC-880 LAB grinder is plugged in. Never use a grinder that is not equipped with protector or if the protector is broken SAFETY INSTRUCTIONS 1.
Readjustment of grind setting The HC-880 LAB was factory set for different types of coffee powders, from finest Turkish coffee to coarsest hand filter coffee. However, in course of time or after thorough cleaning procedures or disks replacement, some changes in setting may be required. If you feel your grinder is out of tune (either a squeaking noise or grind powder is too coarse at the finest setting) please run through the following procedure.
5. Before reinstalling the beans hopper, make sure it is thoroughly dried. Cleaning the grinding chamber Before starting the thorough cleaning procedure of the HC-880 LAB read the complete set of instructions. 1. Refer to the previous paragraph 8 in order to disassemble the grinding knob 2.
Page 10
HC-880 VER2.1 – Manual book b. Examine both of the blades’ condition and replace them as necessary. c. The replacement and assembly of a new set of blades is a delicate task. Only skilled technical personnel should be allowed to perform blade removal and assembly.
Page 11
HC-880 VER2.1 – Manual book A ‘deeper’ cleaning procedure should only be performed by a skilled technician. To ensure long lasting grinder and great fresh taste of coffee, the cleaning procedure as described above should be repeated routinely and at least once per month or as necessary according the grinder’s usage and quality of beans.
Page 12
HC-880 VER2.1 – Manual book Add your remarks here: Date Event remark HeyCafé Co., Ltd. Page 12 of 13 09/11/2017Ver.1...
Page 13
HC-880 VER2.1 – Manual book Important details and telephone numbers: Local dealer address:________________________________________________________________ Telephone number:____________________ Fax number:_______________________ Technician mobile number:____________________ name:__________________ Coffee beans supplier details:__________________________________________________________ Telephone number:____________________ Fax number:_______________________ HeyCafé Co., Ltd. Page 13 of 13 09/11/2017Ver.1...
Need help?
Do you have a question about the HC-880 LAB and is the answer not in the manual?
Questions and answers