Smartskin Sensor; Selecting The Light Intensity - Philips Lumea BRI945 Manual

English
20
Underarm attachment (BRI946, BRI947, BRI948)
Bikini attachment (BRI946, BRI947, BRI948)

SmartSkin sensor

Selecting the light intensity

The underarm attachment has a specifically curved-out design to treat
underarm hairs that might be hard to reach.
The bikini attachment has a specialized design for effective treatment of the
bikini area. It has a curved-out design and has a higher light intensity compared
to body attachment. Hair in this area tends to be thicker and stronger than leg
hair.
Lumea offers SenseIQ technology for a personalized hair removal treatment.
The integrated SmartSkin sensor measures the skin tone at the start of each
session and during the session. This provides two features:
1 The SmartSkin sensor prevents you to treat areas of your skin that are too
dark: if it detects a skin tone that is too dark for treatment with Lumea, the
'READY to flash' light starts blinking orange. It does not flash when you press
the flash button. The device automatically disables. This prevents you from
developing skin reactions.
2 The SmartSkin sensor will help you to select the light intensity setting that is
comfortable for your skin. For this you can use the SmartSkin button
Lumea provides 5 different light intensities, you will always be able to change
to a light intensity setting you find comfortable.
1 Press the on/off button
at light intensity setting 1.
to turn on the device. The device starts to operate
.