BIG ASS FANS Isis Installation Manual page 36

28
To start the fan, press the pushpad on the controller. The fan may take up to
30 seconds to start rotating. To turn the fan on full speed, press and hold the
pushpad.
To stop the fan, press the pushpad or press and hold the left side of the
fan speed bar. Note: When power is turned off, the light at the bottom of the
controller remains lit.
Use the fan speed bar to control the speed of the fan. To increase fan speed,
press the right side of the fan speed bar. To decrease fan speed, press the left
side of the fan speed bar.
Changing the fan direction (indoor fans)
CAUTION: When adjusting the fan direction selector switch, be careful not to damage internal components!
CAUTION: Do not insert foreign objects into the fan direction switch.
To reverse the direction of the fan, remove power from the fan. Select the direction of the fan using the Fan Direction Selector switch.
REV
Fan Direction
Selector Switch
WWW.BIGASSFANS.COM
Isis
Fan Operation
Troubleshooting on page 34.
FWD
Fan Status LED
©2013 DELTA T CORP.
®
Wall Controller with
DBA BIG ASS FAN CO. ALL RIGHTS RESERVED
Wallplate
Speed
Indicator
Speed
Bar
Pushpad