BIG ASS FANS Isis Installation Manual page 11

Parts included
Extension Tube Hardware:
Screw
(4) 3/8" Flat Washer
(2) 3/8" Nylock Nut
1
Safety Cable
Wall Controller
Wall Controller
1. The safety cable is attached to extension tube with a 3/8" bolt and nut.
2.
3. If installing the fan on a typical lighting circuit with one basic light switch, the Limited Access Controller must be installed.
4. Airfoils can be purchased with winglets (standard) or airfoil tips (optional). If you purchased the Isis with airfoil tips, they will arrive already installed in
the airfoils. Winglets are installed on the airfoils during Airfoil Installation.
WWW.BIGASSFANS.COM
Pre-Installation (cont.)
Note: Drawings below are not to scale.
Hardware
Main Fan Unit Hardware:
Screw
(2) 3/8" Flat Washer
(1) 3/8" Nylock Nut
Mounting
Main Fan Unit
3
Wallplate
©2013 DELTA T CORP.
®
Isis
Airfoil Hardware:
(20) 5/16-18 x 5/8" Bolt
(20) 5/16" Wave
Washer
Wood Frame Mounting
Brackets
(10) Airfoil Retainer
DBA BIG ASS FAN CO. ALL RIGHTS RESERVED
Winglet
Hardware:
(10) 10-32 x 1/2"
Screw
Upper Mount
Wood Framing Channels
2
Airfoils
(10) Airfoil
(10) Winglet
3
2