Setup & Installation
Install your Lightcloud Controller
2
Install at a Junction Box (Indoor/Outdoor)
2a
WHITE
BLACK
0-10V DIMMING
0-10V is a common method of low-voltage control of dimmable
drivers and ballasts. Purple: 0-10V positive | Gray: 0-10V common
NOTE: The National Electrical Code requires that low-voltage wiring used in
the same enclosure as high-voltage wiring have an equal or better insulation
rating. You may need to complete your low-voltage wiring in another
enclosure or use a partition.
To Load
WHITE
WHITE/RED
(cont'd)
Lightcloud
™
Controller
RED
PURPLE
GRAY