RAB Lighting FALCOR 80W Installation Instructions Manual page 24

Setup & Installation
Find a suitable location
1
Use these guidelines when installing devices:
• If there is a clear line of sight between two Lightcloud devices,
they can be placed up to 1000 feet apart.
• If the two devices are separated by ordinary drywall construction,
try to keep them within 100 feet of each other.
• Brick, concrete and steel construction may require additional
Lightcloud devices to go around the obstruction.
Add an additional Lightcloud
Device to extend network range
around corners
D R Y WA L L
O R S I M I L A R
Lightcloud Gateway
<= 100 ft.
B R I C K ,
C O N C R E T E O R
M E TA L WA L L
Install your Lightcloud Sensor
2
INSTALL AT A JUNCTION BOX INDOOR/OUTDOOR
The Sensor can control other Lightcloud devices, wirelessly.
If you don't need to hard-wire a switched circuit to the Sensor,
no problem—just tie the white/red wire to neutral and cap o any
unused wires.
Sensor attached
attached to wired
junction box