Display; Blood Glucose Test Strips - PharmEvo Evocheck GO ELI-00055 Instruction Manual

Table of Contents

Advertisement

Display

Apply Blood
Date
Day Average
Pound Sign (#)
Memory
Control Solution
Hypo Icon
BlueTooth Icon
Before Meal
After Meal
Icon
Icon

Blood Glucose Test Strips

blood glucose test strips contain chemical reagents. After
the test strip is placed into the test strip port and a blood sample is
applied, the blood automatically wicks into the test window. A
transient electrical current is generated, and this current is measured
to determine the correct blood glucose level reading.
Fingerhold Area
Sample Area
Apply blood or
control solution here
Test Window
Check to confirm an
adequate sample has been applied
Icon
Time
AM/PM
Readings Icon
Low Battery Icon
Mute
Test Reminder Alarm
Check Ketone Alert
Hyper Icon
Test Result
Display Area
Blood Glucose
Measurement Units
Use this area to grip the strip
Contacts
Insert this side into
the test strip port
4
IMPORTANT:
Make sure that the blood sample is applied at the edge of the
test strip, never on the top surface. Applying blood to the top
surface of the strip will lead to inaccurate results.
Correct
Apply blood samples to the edge of the strip until the test window is
full. The blood glucose meter will begin to count down when there is
adequate blood. If the test window is not full, you may add additional
blood within three seconds. If not enough blood has been applied, an
error E-3 will be displayed. Please discard and use a new test strip.
If you see that the test window is not full, but the countdown begins
anyway, please discard and use a new test strip.
Each test strip package is marked with a batch number (LOT),
expiration date (
) and a control solution range (CTRL1 and
CTRL2). Please use
Blood Glucose Meter. The use of non-approved test
strips will result in the meter not turning on or an error.
Storage and Handling
Please read and follow the storage and handling conditions
below:
Store test strips in a clean, dry environment at 2-35°C (36-95°F).
Do not store test strips in heat or direct sunlight.
Incorrect
Blood Glucose Test Strips with the
5

Advertisement

Table of Contents
loading

Table of Contents