Table of Contents
Advertisement
Battery Replacement
1.
The
battery icon will appear on the display when the battery needs replacing.
2.
Turn the meter OFF and slide the rear battery cover off.
3.
Install the 9V battery and replace the cover.
Never dispose of used batteries or rechargeable batteries in
household waste.
As consumers, users are legally required to take used batteries to
appropriate collection sites, the retail store where the batteries were
purchased, or wherever batteries are sold.
Disposal: Do not dispose of this instrument in household waste. The
user is obligated to take end-of-life devices to a designated collection
point for the disposal of electrical and electronic equipment.
Other Battery Safety Reminders
• Never dispose of batteries in a fire. Batteries may explode or leak.
•
Never mix battery types. Always install new batteries of the same type.
USB PC Interface
The meter has a built-in USB port for use with the supplied data acquisition
software. The software allows the user to download stored data, view,
save, export, and print readings from the sound level meter.
SOFTWARE INSTALLATION
Refer to the documentation included with the software for complete
details on installation and operation of the application program and
the USB driver software.
SOFTWARE COMMUNICATION
1.
Connect the meter to the PC using the supplied USB cable.
2.
Turn the meter ON and press the SETUP button.
3.
Launch the application program.
4.
Select the COM port which has the CP210X driver installed.
5.
Data will appear on the pc screen when communication is
established.
Advertisement
Table of Contents
Need help?
Do you have a question about the SL600-KIT and is the answer not in the manual?