Fisher & Paykel DISHDRAWER DD60D4HNX9 User Manual page 14

Using
SANITIZE
The wash modifier adjusts the wash program to meet the conditions required by
SANITIZE
Section 6, NSF 184 for sanitization to occur. While
monitored to ensure that these conditions are met.
Only programs utilising the
required by Section 6, NSF 184. Other wash programs may not reach the temperatures
required for sanitization to occur. See table on previous page for wash programs that have
sanitize available.
For sanitization to occur, the temperature of the water needs to reach 70°C. Ensure all
items are dishwasher safe before running the sanitize modifier.
If the wash is interrupted or the water supply is turned off during the program, the heating
conditions for sanitization may not be met. You may need to run the program again.
If sanitization has been successful
If sanitization has not been successful
14
WASH MODIFIERS
wash modifier are certified to meet the conditions
SANITIZE
is running, the wash program is
SANITIZE
The wash will finish as normal.
An alert will sound and when the drawer is
opened the
SANITIZE
1 Check if the water supply has been turned
off or the wash program interrupted.
2 Press and hold
and then again to clear the alert code.
3 Reset
SANITIZE
For more information, refer to 'Fault codes'.
indicator will flash.
once to stop the beeping
and run the cycle again