Packaging Content; Product Features; Panel Control - universalblue UAP1906-22 User Manual

product (or parts of it).
Never connect
•
electrical appliances to a power
outlet. This prevents a bad
connection and high heat load.
It is forbidden to place the
•
portable air conditioner (indoor
& outdoor unit) in the rain or in
the water.
Distance to burning objects
•
at least 2 meters due to fire
prevention measures.
Users are strictly forbidden to
•
add refrigerant themselves.
Do not pull directly on the hose
•
or destroy it with sharp objects. If
the hose is found to be damaged,
discontinue use and contact the
distributor for repair.

PRODUCT FEATURES

The contents of the package will contain
the following. See picture 01 and 02 on
page 4.
Parts:
1. Display board
2. Handle
3. Air inlet
4. Air outlet
5. Grid
6. Hose
7. Air inlet and filter
8. Lock
9. Hand screw
10. Slotted nut
11. Support black
12. Outside bracket
13. Hand screw
14. Shockproof rubber dampers
15. Inside bracket
Note: the picture is for reference only. The
content may vary depending on the model.

PACKAGING CONTENT

See table 02 on page 8.
multiple
PRODUCT FEATURES
See table 01 on page 7.

PANEL CONTROL

See picture 03 on page 5.
16. Sleep mode
Press the key to enter or quit sleep mode.
After 20 seconds, all lights and the digital
display turn off and the air conditioner
goes to sleep. The indoor unit fan continues
to run at low fan speed.
17. Fan speed
Press the key to choose low/high fan speed.
18. Swing
Press fan speed and sleep mode key at the
same time to turn on/off swing function.
19. Temperature/time adjustment
In cooling mode, press the key to increase
or decrease the temperature; In timer mode,
press the key to adjust time to turn on/turn
off the machine, the setting temperature
adjustable from 16~30ºC; Press Up/Down
key at the same time to transfer between
ºC and ºF.
20.
Check temperature and time from this
window.
21. Mode
Press this key to select cooling, fan,
dehumidification
turned on mode, by pressing this key to set
timing on/off (3 seconds).
22.
Press this key to turn the device on and off.
When the air conditioner is switched on,
the temperature is set to 22ºC by default.
The temperature sensor measures the
ambient temperature and if exceeds 22ºC,
the outdoor unit starts to work to bring
the temperature down. If the ambient
temperature already below 22ºC, then the
Display window
modes;
Power
EN
In standby/
21