Danfoss TP4000 Installation Instructions Manual page 9

To temporarily alter the current programmed temperature
· Press Λ or V until required temperature is
displayed.
(This override will automatically cancel at beginning
of next programmed event).
Frost Protection and Thermostat Mode
A constant temperature between 5°C-30°C can be
selected if desired, for example, for frost protection.
· Press Λ and V together.
· Use Λ or V buttons to set the desired low
temperature.
- At 5°C a snowfl ake symbol appears
indicating frost protection mode.
- At all other temperatures the snowfl ake
symbol is turned off .
· To return to automatic programming press Λ
and V together again.
GB
9