Yamaha YZ250X 2023 Owner's Manual page 82

2
1
12.Install:
• Throttle cable "1"
(to the tube guide "2")
TIP
Apply the lithium-soap-based grease on the
throttle cable end and tube guide cable winding
portion.
2
13.Install:
• Roller "1"
• Collar "2"
TIP
• Apply the lithium-soap-based grease on the
roller sliding surface and cable guide.
• Install the roller so that the "UPPER" mark "a"
faces upward.
• Pass the throttle cable in the groove "b" in the
roller.
2
a
14.Install:
• Throttle cable cap "1"
• Throttle cable cap screw "2"
3
1
1
b
4-12
Throttle cable cap screw
0.5 N·m (0.05 kgf·m, 0.37 lb·ft)
15.Adjust:
• Throttle grip free play
Refer to "CHECKING THE THROTTLE
GRIP" on page 3-5.
16.Install:
• Cap cover "1"
17.Install:
• Brake master cylinder "1"
• Brake master cylinder holder "2"
• Front brake master cylinder holder bolt "3"
Front brake master cylinder hold-
er bolt
9 N·m (0.9 kgf·m, 6.6 lb·ft)
TIP
• Install the holder so that the arrow mark "a" fac-
es upward.
• First tighten the bolt on the upper side of the
brake master cylinder holder, and then tighten
the bolt on the lower side.
HANDLEBAR