Rear Panel - Pioneer Elite VSX-LX301 Basic Manual

> Before start > Hookup > Setup > Playback

Rear Panel

1 2
1. DIGITAL IN OPTICAL/COAXIAL jacks: Input TV or AV
component digital audio signals with a digital optical
cable or digital coaxial cable.
2. ANTENNA AM LOOP/FM 75Ω terminal: The supplied
antennas are connected.
3. VIDEO IN jacks: Input the AV component video signals
with an analog video cable.
4. COMPONENT VIDEO IN jacks: Input the AV component
video signals with a component video cable.
5. NETWORK port: Connect to the network with an
Ethernet cable.
6. HDMI OUT jacks: Transmit video signals and audio
signals with a HDMI cable connected to a monitor such
as a TV or projector.
7. HDMI IN jacks: Transmit video signals and audio signals
3 4 5
11 12
with a HDMI cable connected to an AV component.
8. Wireless antenna: Used for Wi-Fi connection or when
using a BLUETOOTH enabled device. Adjust their
angles according to the connection status.
9. RS-232C port: For connection to the home control
system.
10.AC IN: The supplied power cord is connected.
11.SIGNAL GND terminal: The ground wire of the turntable
is connected.
12.AUDIO IN jacks: Input AV component audio signal with
an analog audio cable.
13.SPEAKERS terminals: Connect speakers with speaker
cables.
14.ZONE 2 PRE/LINE OUT jack: Output audio signals with
an analog audio cable to a pre-main amplifier or a
> Part Names
6 7
13 14 15
> Advanced Manual
8 9 10
16 17
powered amplifier in a separate room (ZONE 2).
15. SUBWOOFER PRE OUT jack: Connect a powered
subwoofer with a subwoofer cable. Up to two powered
subwoofers can be connected. The same signal is output
from each of the SUBWOOFER PRE OUT jacks.
16. IR IN/OUT port: Allows you to connect a multiroom
remote control kit.
17. 12V TRIGGER OUT A/B jacks: Allows you to connect a
device with 12V trigger input jack to enable link operation
between the device and the unit.
Troubleshooting | Appendix
8
90°
180°
27