Pioneer Elite VSX-LX301 Basic Manual page 43

Hide thumbs Also See for Elite VSX-LX301:
Table of Contents

Advertisement

> Specifications
> Specifications
> Settings
> Settings > Listening Modes > Playback Function
■ Distance
Set the distance from each speaker to the listening position.
Setting Item
Default Value
Front Left
10.0ft/3.00m
Center
10.0ft/3.00m
Front Right
10.0ft/3.00m
Height Left
10.0ft/3.00m
Height Right
10.0ft/3.00m
Surround Right
10.0ft/3.00m
Surr Back Right
10.0ft/3.00m
Surr Back Left
10.0ft/3.00m
Surround Left
10.0ft/3.00m
Subwoofer
10.0ft/3.00m
• Default values vary depending on the regions.
> Listening Modes > Playback Function
Setting Details
Specify the distance between each speaker and
the listening position.
Specify the distance between each speaker and
the listening position.
Specify the distance between each speaker and
the listening position.
Specify the distance between each speaker and
the listening position.
• The setting cannot be changed if "Zone 2" is set
in "System Setup" - "Speaker" - "Configuration"
- "Zone Speaker" and Zone 2 is on.
Specify the distance between each speaker and
the listening position.
• The setting cannot be changed if "Zone 2" is set
in "System Setup" - "Speaker" - "Configuration"
- "Zone Speaker" and Zone 2 is on.
Specify the distance between each speaker and
the listening position.
Specify the distance between each speaker and
the listening position.
• This setting cannot be changed if "System
Setup" - "Speaker" - "Configuration" - "Zone
Speaker" is set to "Zone 2".
Specify the distance between each speaker and
the listening position.
• This setting cannot be changed if "System
Setup" - "Speaker" - "Configuration" - "Zone
Speaker" is set to "Zone 2".
Specify the distance between each speaker and
the listening position.
Specify the distance between each speaker and
the listening position.
• Distance units can be switched by pressing MODE on the remote controller. When the unit is set as
feet, you can set between 0.1 ft and 30.0 ft in increments of 0.1ft. When the unit is set as meters, you
can set between 0.03 m and 9.00 m in increments of 0.03 m.
> Basic Manual
> Basic Manual
Troubleshooting Appendix
Troubleshooting Appendix
|
|
11
11

Advertisement

Chapters

Table of Contents
loading

Table of Contents