Table of Contents
Advertisement
> Specifications
> Specifications
> Settings
> Settings > Listening Modes > Playback Function
Setting Item
Default Value
Audio TV Out
Off
Audio Return
(Auto) (＊)
Channel
Auto Delay
On
> Listening Modes > Playback Function
Setting Details
You can enjoy audio through the speakers of the
TV while this unit is on.
"On": Use this function
"Off": Do not use this function
• This setting is fixed to "Auto" if you have set
"System Setup" - "Input/Output Assign" - "TV
Out/OSD" - "HDMI Out" or "Other" - "HDMI Out"
in "AV Adjust" to "MAIN" or "MAIN+SUB" and
"HDMI CEC" is set to "On". If you change this
setting, set "HDMI CEC" to "Off".
• Listening mode cannot be changed while "Audio
TV Out" is set to "On" and audio is being output
through the speakers of the TV.
• Depending on your TV set or input signal of the
component, audio may not output through the
speakers of the TV even if this setting is set
to "On". In such case, audio is output from the
speakers of the unit.
• If you operate the MASTER VOLUME dial on
this unit when audio that is being input through
this unit for output from the TV speakers, audio
is output from this unit. If you do not want to
output audio from the unit, change the unit or TV
settings, or reduce the volume of the unit.
You can enjoy sound of the HDMI connected ARC
compatible TV through the speakers connected to
the unit.
＊ To use this function, set "HDMI CEC" to "On" in
advance.
"Auto": When enjoying the TV sound through the
speakers connected to the unit
"Off": When not using the ARC function
This setting automatically corrects any
desynchronization between the video and audio
signals based on data from the HDMI LipSync
compatible TV.
"On": Automatic correction will be enabled
"Off": Automatic correction will be disabled
■ Power Management
Setting Item
Default Value
Sleep Timer
Off
Auto Standby
Off
Auto Standby in
(Off)
HDMI Standby
Through
USB Power Out
Off
at Standby
> Basic Manual
> Basic Manual
Troubleshooting Appendix
Troubleshooting Appendix
Setting Details
Allows the unit to enter standby automatically when
the specified time elapses. Select a value from "30
minutes", "60 minutes", and "90 minutes".
"Off": Does not turn the unit to standby
automatically
This setting places the unit on standby
automatically after 20 minutes of inactivity without
any video or audio input. (When "USB Power
Out at Standby" or "Network Standby" is on, this
becomes the HYBRID STANDBY mode which
reduces the increase in power consumption to a
minimum.)
"On": The unit will automatically enter standby
mode ("AUTO STBY" will light.)
"Off": The unit will not automatically enter standby
mode
• "Auto Standby" is displayed on the display and
TV screen 30 seconds before the Auto Standby
comes on.
• "Auto Standby" does not work when Zone 2 is
active.
Enable or disable "Auto Standby" while "HDMI
Standby Through" is on.
"On": The setting will be enabled
"Off": The setting will be disabled
• This setting cannot be set to "On" if "Auto
Standby" is set to "Off".
Devices connected to the USB port are supplied
with electricity even when this unit is in standby
mode when this function is "On".
• When using this feature, power consumption
increases even when the unit is on standby,
however, the increase in power consumption is
kept to a minimum by automatically entering the
HYBRID STANDBY mode, where only essential
circuits are operating.
|
|
17
17
Advertisement
Chapters
Table of Contents
