Care and Cleaning
FTXTM30M2V1B
■
Titanium apatite deodorizing fi lter
1.
Open the front panel and
pull out the air fi lters.
2.
Take off the Titanium
apatite deodorizing fi lter.
• Remove the fi lters from the tabs.
3.
Clean or replace the
Titanium apatite
deodorizing fi lter.
[Cleaning]
3-1 Vacuum dust, and soak in lukewarm
water or water for about 10 to
15 minutes if very dirty.
3-2 After washing, shake off remaining
water and let them dry in the shade.
• Do not wring out the fi lter to remove water from it.
35
[Replacement]
Remove the fi lter from the tabs
Page 31
and prepare a new one.
• Dispose of the old fi lter as non-fl ammable waste.
4.
Insert the Titanium apatite
deodorizing fi lter as they
were.
• When attaching the fi lter, check that the fi lter is
properly set in the tabs.
5.
Reattach the fi lters.
6.
Close the front panel
slowly.
NOTE
• Operation with dirty fi lters:
− cannot deodorize the air,
− cannot clean the air,
− results in poor heating or cooling,
− may cause odor.
• Dispose of old fi lters as non-fl ammable waste.
• To order a Titanium apatite deodorizing fi lter, contact the dealer
where you bought the unit.
Page 34
Page 34