Off Timer Operation - Daikin Perfera FTXTM-M Operation Manual

OFF TIMER Operation

NOTE
■
Notes on TIMER operation
• When TIMER is set, the present time is not displayed.
• Once you set ON/OFF TIMER, the time setting is kept in the memory. The memory is canceled when remote controller batteries are
replaced.
• When operating the unit via the ON/OFF TIMER, the actual length of operation may vary from the time entered by the user. (Maximum
approx. 10 minutes)
■
NIGHT SET mode
• When the OFF TIMER is set, the unit automatically adjusts the temperature setting (0.5°C up in COOL, 2.0°C down in HEAT) to prevent
excessive cooling (heating) for your pleasant sleep.
23
Timer functions are useful for automatically switching the unit on or off at night or
in the morning. You can also use OFF TIMER and ON TIMER in combination.
■
To use OFF TIMER operation
• Check that the clock is correct.
If not, set the clock to the present time.
1.
Press
• " " and day of the week disappear from the LCD.
2.
Press
point you like.
• Each pressing of either button increases or decreases the time setting by 10 minutes.
Holding down either button changes the time setting rapidly.
3.
Press
• " " and setting time are displayed on the LCD.
• The TIMER lamp lights yellow.
Display
■
To cancel OFF TIMER operation
Press
• " " and setting time disappear from the LCD.
• " " and day of the week are displayed on the LCD.
• The TIMER lamp goes off.
Page 11
.
• " " is displayed on the LCD.
• " " blinks.
until the time setting reaches the
again.
Page 5
.