System Connections; Charge Your Smartphone/Tablet; Line In Connection; Clock Setting - RCA RS2929B User Manual

Hide thumbs Also See for RS2929B:

User manual

Table of Contents

Available languages

SPEaKER coNNEcTIoNS

Connect the speakers to the R terminal and the L terminal.

NoTE : Connecting speakers other than the speakers supplied with the unit may damage the unit

USING THE ac aDaPTER

Using an AC adapter other than the one supplied with the unit may damage the unit. This AC adapter operates

on AC 100V-120V ~ 50/60Hz.

caUTIoNS:

• Before use, ensure the rated voltage of the adapter matches your local voltage.

• Using an AC adapter other than the one supplied with the unit may damage the unit.

• The included AC adapter is for use with this unit only. Do not use it with other equipment.

• If you are not going to use the unit for a long time, disconnect the AC adapter from the wall outlet.

• Whenever the AC adapter is plugged in to a wall outlet, electricity is running through the unit, even when the

power switch is turned off.

You can charge your smartphone/tablet through the USB socket with a USB cable (not supplied).

Connect a USB cable (not supplied) to the USB socket on the back of the unit and the dock connector on your

smartphone/tablet.

You can connect audio devices such as your CD player or MP3 player to the unit via the LINE IN jack. To do this,

connect an audio cable from the line out or headphone out jack of the other audio device to the LINE IN jack on

the back of unit. Press the

Note : We recommend you unplug the device from the LINE IN jack when not in use.

Setting the clock can only be done in STANDBY mode.

• If the unit is plugged in with the supplied AC adapter and the unit is in standby mode.

1. Press and hold the

2. Press the

then the minute digits blink.

3. Press the

clock.

SoURcE button to switch to TUNER mode.

Press the

Searching for a Station automatically

• Press and hold the

a station, the search stops.

Presetting Stations

1. Tune in to a desired station. Press the

2. The preset number will blink and the "MEM" indicator will be shown on the display.

3. Press the

/MEM.UP button to select the preset number.

/PRoG/MEM button again to store it in memory.

4. Press the

Tuning in to a Preset Station

/MEM.UP button to select a preset number.

Press the

Note : Do not connect the FM antenna to an outside antenna.

When the reception is good, the "

RS2929B_IB_E&S&F_W041.indd 4