Subscribe to Our Youtube Channel
Related Manuals for vita SMART.FIRE
Summary of Contents for vita SMART.FIRE
- Page 1 VITA SMART.FIRE® Instructions for use VITA Farbkommunikation VITA Farbkommunikation VITA shade determination VITA shade communication VITA shade reproduction VITA shade control VITA – perfect match.
- Page 2 Dear customer, Congratulations and thank you for choosing the VITA SMART.FIRE firing system. The VITA SMART.FIRE firing system is manufactured using the highest quality standards, and is equipped with modern hardware and software for easy and intuitive control and operation.
-
Page 3: Table Of Contents
5. Additional information 5.1 VITA system solutions ........13 5.6 Patents and trademarks . -
Page 5: The System
Mains power Power connection supply connection for vacuum pump Furnace head Firing base Base Vacuum Control unit Fuses Accessory drawer connection Note: • The space-saving VITA SMART.FIRE chairside firing unit is suitable for veneering, crystallization, glaze, stain and corrective firing. -
Page 6: Accessories
1. The system 2. First use 1.2 Accessories Platinum pins = two pieces (molar, anterior tooth) Firing tray Ø = 60 mm Fibrous pad firing support Ø = 44 mm Firing pliers L = 160 mm Cooling table Ø = 70 mm Note: •... -
Page 7: Starting Firing In Six Steps
1. The system 2. First use 3. Scope of supply / system solutions 2. First use 2.1 Starting firing in six steps Connect the firing unit and the control Connect the firing unit to the power Turn on the main switch. unit to the connecting cable. -
Page 8: Switching Off The Firing Unit And Control Unit
• Screen cleaners are especially good since they do not cause any scratches, have an antistatic effect and prevent further dirt accumulation. Please note: • Damage to the display resulting from improper use during operation or cleaning is excluded from the VITA warranty. -
Page 9: Vita Smart.fire Scope Of Supply
6) 220 V – 230 V ZA 7) 220 V – 230 V AU 8) 220 V – 230 V IL Instructions for use for the VITA SMART.FIRE firing system Note: • All VITA SMART.FIRE components can be individually reordered. -
Page 10: Technical Data / Information
European Union (EU). Old units can be returned to VITA Zahnfabrik. CE marking VITA SMART.FIRE complies with the applicable regulations of the European Union (EU). The declaration of conformity can be requested from VITA (Regulatory Affairs Department) at: www.vita-zahnfabrik.com... -
Page 11: Information
4. Technical data / information 3. Scope of supply / system solutions 5. Additional information 4.4 Information Basic information on the device design • The instrument is designed according to state-of-the-art technology and recognized safety standards. • However, if it is used inappropriately, hazards for the health and safety of the operating personnel or third parties, as well as the risk of damaging the instrument and other material property, may arise. -
Page 12: Safety Functions
4. Technical data / information 3. Scope of supply / system solutions 5. Additional information 4.5 Safety functions The firing unit has the following safety and monitoring features: 1. Temperature sensor monitoring 2. Power supply failure protection 3. Obstruction sensor 4. -
Page 13: Vita System Solutions
• You can use the combipress unit VITA VACUMAT 6000 MP to fire and press your press ceramics. • It is recommended to use the VITA ZYRCOMAT 6100 MS for sinter firing. • Note: When using a hybrid ceramic, firing must not be carried out. -
Page 14: Competitor Material In The Vita Smart.fire
The VITA SMART.FIRE contains firing programs for Celtra Duo, IPS e.max CAD, and IPS Empress CAD. However, it should be noted that the firings for IPS e.max CAD in VITA SMART.FIRE must be carried out on an Ivoclar Vivadent firing tray. The firings for IPS Empress CAD and Celtra Duo can be carried out on the VITA SMART.FIRE round firing tray with VITA platinum pins. -
Page 15: Hotline And Support
Mrs. Carmen Holsten and her team (Internal If you have technical questions concerning Sales Department) will be glad to assist you VITA product solutions, you can with orders or questions about delivery, contact Dr. Michael Tholey product data and marketing materials. - Page 16 The VITA Modulbox is not necessarily a component of the product. Date of issue of this information: 2023-07 After the publication of this information for use any previous versions become obsolete.
Need help?
Do you have a question about the SMART.FIRE and is the answer not in the manual?
Questions and answers