Radio; Selecting Tuner Band; Tuning To A Station; Using Presets - RCA RS2042 User Manual

RS2042 EN 2/24/04 9:44 AM

Radio

Selecting Tuner Band

EN
1. Press SOURCE on the main unit or TUNER on
the remote control to enter Tuner mode.
2. Press BAND / AUTO PROG / CD INFO to select
between FM or AM Radio band.
Tips:
Your audio system has 32 preset stations.

Tuning to a Station

Press SKIP BACKWARD
to select frequencies.

Using Presets

The tuner can be in either TUNE or PRESET mode.
When in PRESET mode, the PROG light is on.
• Press TUNE/PRESET to toggle TUNE and
PRESET mode.
• Press PRESET - or PRESET +
main system or PRESET
the remote control to access the previous or
next preset station. The display first shows the
preset program number and after a few
seconds, the frequency will be displayed.
(FMPR:01 is FM preset 1)
11
Page 16
Auto Preset Programming
(FM only)
Press and hold the BAND / AUTO PROG / CD
INFO button for 2 seconds to scan stations in FM
band. The stations will then be stored as preset
channels. A maximum of 32 stations can be
stored. Beware of your preset channels being
erased accidentally because the scanning and
storing process is automatic upon pressing the
button. You can stop the automatic scan by
pressing any button, but the erased stations
cannot be recovered.

Manually Setting Presets

1. Press the TUNE/PRESET button to enter TUNE
mode.
or SKIP FORWARD
2. Press SKIP BACKWARD
FORWARD
frequency.
3. Press the PROG/SET button once.
4. The most recently accessed program location
will be displayed.
5. If a different program location is preferred,
press PRESET - v or +
desired preset number (1-32).
6. Press PROG/SET to store the selected
on the
frequency at that preset.
or on

Suppressing Stereo Signal

Press FM ST to toggle between FM mono and
stereo mode. (Remote Only) "ST" is displayed in
stereo mode.
or SKIP
to access the desired
to move to the