Setting Up A Cd Program; Playing A Program List; Displaying The Program List; Edit Program List - RCA RS2042 User Manual

RS2042 EN 2/24/04 9:44 AM
CD Player

Setting Up a CD Program

Tips:
You can create a program of up to 32 tracks.
1. While the CD player is stopped, press
PROG/SET to enter program mode. The
system displays the next available program
number (-- -- P:01).
2. Press the corresponding disc number on the
main unit or DISC SKIP on the remote control
to select disc. Refer to the Disc Number display
to see the disc that is selected.
3. Press SKIP BACKWARD
FORWARD on the main unit or
on the remote control to select track to enter
into memory.
4. Press PROG/SET to save your settings.
5. Repeat steps 2 to 4 to store more tracks into
program memory.
Page 15

Playing a Program List

While in PROGRAM mode , press PLAY/PAUSE
If you are not currently in program mode, press
PROG/SET to enter program mode before
pressing PLAY/PAUSE
Display Program List
1. While the CD player is stopped, press
PROG/SET to enter PROGRAM mode.
2. Press PROG/SET repeatedly to view each track
assignment in the program list.

Edit Program List

1. Follow "Display Program List" steps until the
location to be edited is displayed.
2. Repeat steps 2 to 4 under "Setting Up a CD
Program " to edit the track to store into
/ SKIP
memory.
or

Deleting Program List

While in PROGRAM mode, press and hold STOP
for 3 seconds. They system displays the message
CLEAR.
EN
.
.
10